Ramon's World

One of my friend asked me to send inspirational text message because she was down because she had a problem on her family but i told her that its normal to have a problem in your family circle. My advise to her is to think positive always.

Treat everybody with love then it will bounce back to you. It may not instant but it will come little by little. Being a positive thinker, you will convert negative forces to positive then it will make your day brighter.

The world is full of beauty when your heart is full of love. So start and end your day with love and smile in your heart. Have a peaceful day.

"Life can give you a hundred reasons to cry, But you can give life a thousand reasons to smile."

Welcome to the Smart GPRS or 3G tutorial page. The information below will help you and guide in setting up your phone for GPRS or 3G connection. It will also show you how to hook up your PC or laptop to any Smart 3G-enabled phone:

Download Smart GPRS settings:

Step 1: Using your 3G handset, go to Tools > Settings > Network Mode > select Dual Mode.

Step 2: Activate your handset by texting Set 3G and send to 211.

Step 3: Save Settings sent by 333. Key in 1234 when prompted.

If you have a Nokia 6120, that’s “SET 3G N6230”

To download Smart MMS phone settings:

Key in SET MMS and send to 211.

To download SMART GPRS phone settings:

Key in SET GPRS and send to 211.

Example: If you have a Nokia 6230, that’s “SET MMS N6230”

Note:
The configuration settings will be sent to your phone. You will need to select “Save All” to save the settings in the phone. Some MMS and GPRS handsets already have pre-loaded phone settings.

Activation of MMS and GPRS will require a confirmation message from Smart. A message will be sent to the sub once the feature has been activated.

This is a great technique that lets you focus attention by using dramatic soft lighting.

I love the picture with drama effect because for me this is cool and create peace of mind. Before I am very curious how the photographer did that kind of effects but my friend told me that photographer use plug ins in photoshop so they can easily do the effect but i discovered lately that i can create the drama effect with a few steps so i will share this to all of you.

First step, open your file in Photoshop then once it already open go to:

Filter>Render>Lighting Effects


Just experiment on the Lighting Effects on what is the best lighting effects on your subject or you will follow my set up.


The Final Result. You will see the simple dramatic effect on your subject. There is a lot focus on the subject because some of area are darken to make the subject stand out.

I read it aloud every time i feel so down. In fact, it’s hanging on my wall. I will share this to you so when you feel down too. Read this poem again so you will be inspire. Life must go on. No matter what happen in your life with all its sham, drudgery and broken dreams, it's still a beautiful world. Be cheerful, strive to be happy.

When things go wrong as sometimes will.,
When the road you are trudging seems all uphill.,
When the funds are low but the debts are high.,
And you want to smile but you have to sigh.,
When care is pressing you down a bit.,
Rest if you want…..but do not quit.,

Life is strange with twists and turns.,
As everyone has to sometime learn.,
Dont give up though the pace seems slow.,
You might succeed with another blow.,

Success is failure turned inside out.,
That silver tint of the clouds of doubt.,
And you never can tell how close you are.,
It could be near, when it seems so far.,
So stick to the fight when your hardest hit.,
Its when things seem worst…..that you must not quit

Before I know about Ziddu i have difficulties on sending big files because YAHOO can't serve to send big files more than 10Mb that's why i researched on web then i found this great site knowing that you can earn money here by sharing your files. Click the banner below, if you want to join.

A little info about Ziddu.

Ziddu.com is a 100% free file hosting & sharing solution. Free File Hosting was a always a limited service offered till Ziddu.com was introduced. We had a total new approach while offering the free file hosting services, which mainly concentrated on

Unlimited Storage space

Fast Uploads & Downloads

All Free Accounts

Easy File Management

First Online Sharing Community

Personalized cards using Photos

No Waiting – All instant downloads

Ziddu.com was started in the year 2007 and all its unique and innovative features made it a leader in the market within no time. We strongly believe that “Innovation distinguishes between a leader and a follower.” As Ziddu.com is one of its kinds we offer free file hosting services along with so many other features which make it a power packed one.

Look at the pictures, you feel relax upon watching it. I've never seen so much beauty like this one. I know you are wishing too that you can visit this beautiful scenery created by our Almighty God.

Cleaning of outer surfaces of a computer can be done with soap and water as long as the solution does not enter the internal parts of the computer. The solution should be applied with a lint-free cloth. The cleaning should be followed with an anti-static spray that can be made out of water and fabric softener.

Internal dust can be cleaned with canned air, a soft brush or anti-static vacuum. Anti-static vacuums are specially grounded to prevent static discharge like regular vacuums. Dust can contribute to overheating problems. Making sure that all expansion slot covers are in place can reduce dust buildup. Missing covers can also disrupt the airflow design of the case and cause overheating problems. Additional fans can be added to help cut down on internal temperature problems. Computer equipment should not be placed in areas of extreme temperature or humidity.

Oxidation corrosion can slow down or even prevent electricity from flowing through contact points. Oxidation buildup can be removed by rubbing with an emery board or eraser. It can also be cleaned with special cleaning solution.

Other internal components can be cleaned with Isopropyl alcohol and lint-free swabs.

Monitors should be cleaned with a soap and water solution with the power disconnected. Do not use household cleaning solutions as they can damage the screen. Monitors should not be opened unless you are qualified to work on them. Deadly voltage can be stored inside the monitor even a year after it has been turned off.

Computer components should be transported in antistatic foam or an anti-static bag.

Hard drives are vacuum sealed and should never be opened except by professionals in a "clean room".

Important data should be regularly backed up and stored in a fire-proof safe or at a separate location for protection against fire or theft. Windows NT/2000 Emergency Repair Disks should be stored in a secure place where only authorized personnel can access them.

Because floppy disks are magnetic media, they should not be exposed to magnetic fields that can be produced by TVs, monitors, speakers, power supplies and appliances with motors. Floppy drive heads can be cleaned with a wet or dry head cleaning disk. Keyboards can tend to collect dust between the keys. They can be vacuumed with a small vacuum.

Mice need to occasionally have the X and Y rollers cleaned with a lint-free swab.

Electrical spikes(measured in nanoseconds) or surges(measured in milliseconds) can cause damage to system components or even data loss. Surge suppressors can prevent minor variances in power and provide a stable stream of electricity to the unit, however, they may not always work against larger surges.

Uninterruptable Power Supplies(UPS) provide power to the devices connected to it for a period of time in the event of power loss or sag for long enough to gracefully shutdown the computer and avoid data loss. Unnecessary peripherals such as scanners and printers should not be connected to a UPS as they can overload it.

Laser printers have several hazards that should be noted. The laser can cause blindness, the fuser can cause burns and the power supply can cause electrocution.

Toner cartridges, ink jet cartridges and batteries can be recycled.

Hazardous materials come with Material Safety Data Sheets(MSDS) that provide a variety of information as to how the product should be handled and disposed of.

Electrostatic Discharge(ESD) can be harmful to electronic components and cause them to fail. Low humidity, walking across carpet and appliance motors are some of the common generators of ESD. MOS devices are particularly sensitive to ESD and special care should be taken around them. Below are some of the prevention methods employed to prevent damage:

* Grounding straps are connected to a technicians wrist. You can ground the wrist strap to the earth pin on a wall socket.
* Remove all metallic jewelery.
* Antistatic mats.
* Touching the chassis of the computer while plugged into a grounded outlet.
* Anti-static sprays can be applied to floors, computers and work surfaces.
* A humidifier can be used to keep the humidity above 50%.

An ESD wriststrap should never be worn when working with high voltage equipment such as monitors.

Computer equipment should be unplugged from the wall during electrical storms to prevent equipment damage and injury.

I will share this to you, one of my favorite love letter. This letter touched my heart so much because I feel on this letter that love is deathless even your are already dead. I hate war so much because it makes your love ones far away from you. There is no winner in WAR but we are all loooooosers. Victory in WAR is worst than defeat.

One of my friend, send this tip to my email on curing and prevent back pain because i shared to her that I cannot prolong my time in using computer because I suffer back pain that's why she send this tip then i would like to share this to all because i want to promote good health. Someday, I will put a foundation that can give free medical check up to those people who are in need medical attention. For those people who have the same interest on me. We will make a plan to make our dreams come true. Just leave comment.

I am fun of using lighting effects because as of now it become popular to all photoshop user and an effective way to add bright eye catching details to a photo or illustration. In this tutorial, you will learn a simple technique for creating brilliant light streaks which can be used in different ways to add motion and brightness to your designs.

Step 1

First, lets create a nice background for our effect. Open up a new Photoshop file with 800 x 600px and fill the background with black. Now, create a new layer and fill it with white. We will use the Lighting Effects filter (Filters > Render > Lighting Effects) on this layer to create a nice soft gradient. Next to the Intensity slider, choose any color that you like as long as it is somewhat dark. For this example, I have chosen a green.
Step 2

Now lets create a light from which all of our streaks will be created. Start by creating a new layer and setting it’s blend mode to screen. Then use the Elliptical Marquee Tool to make a circular selection and Feather(Select > Modify > Feather) it with a value of 20 pixels. This will give our light a nice glow around the edges. Using the Radial Gradient Fill tool, we are going to give it some color and intensity. I like to use 3 colors for the gradient. The first and inner most color should be white or something close to it. Make sure to start the fill in the middle of your selection and end it a the edge.

Step 3

Make a copy of the light layer that we just created, and hide the original. You will need it later to make additional streaks. Now, lets scale(Edit > Transform > Scale) the light so that it is much flatter. Doing this allows you to control the thickness of your streak. Make it more compress if you want to have thinner streak.




Step 4

Now we get to start having fun. To give our light that streak look there are two filters we can use: Wave(Filter > Distort > Wave) and Twirl(Filter > Distort > Twirl). By using Wave, you can achieve some very nice looking irregular paths for your light. Like any other filter with sliders, it takes some tweaking to achieve the result you are after, but you will probably need to up the wave length and amplitude considerably. Also, try applying the Wave filter multiple times to the same layer.


The Twirl filter will give you a streak that is moving in a more radial type of path.

Also, don’t be afraid to combine the two. By doing so you will be adding more detail to each streak, and making the overall effect more interesting.

You will copy and paste then rotate so can make another twirl.

Step 5

You will make new layer then use soft brush with 600 diameter then choose Dark green. Paint it in the center.


Choose lighter green then adjust your brush to small diameter 150.


Make it smaller then choose white color then paint it to your layer.


Here is the final result. Be creative. You will add your other technique in photoshop.